Описание

"Подшипники из инновационных высокоэффективных пластмасс и полимеров, срок службы которых легко рассчитать, помогают клиентам компании igus, основанной в 1964 году в г. Кельн, Германия, повысить эффективность своей работы и сократить операционные расходы. Производственные мощности компании, на которых производятся как стандартные промышленные подшипники, так и подшипники по индивидуальным техническим заданиям, расположены в штате Род-Айленд, США.1. All-round mounting: with KMA mounting bracket 2. Economical: Through optimal utilisation of installation space 3. Easy filling: inner cross-section completely accessible 4. Precise division: notched crossbar with scale 5. Short assembly time: flip open in inner and outer radius at both ends 6. Without camber: NC version by reversing the outer link 7. Chip protection: Very close-tight end cap and bottoms 8. High stability: High forces through ""undercut"" design 9. Straight running: inner/outer linkE4.38L Series is suitable for the following types of applications: Vertical: hanging applications, standing applications Horizontal: unsupported applications, gliding applications, unsupported side-mounted applications When to use Series E4.38
  • If a light, cost-effective e-chain® is required with 38 mm inner height and high dynamics
  • Lower weight possible at higher dynamics
  • Inner width up to 150 mm
  • For unsupported lengths up to 2,75 m and fill weights up to 13 kg/m
  • When you need an optimised ratio of inner to outer dimensions with thinner outer links and optimised opening crossbar geometry
  • When very tightly closing lids with almost no gaps and openings is required
  • Also suitable for side-mounted, standing and hanging applications
  • If short installation times are required
When not to use Series R4.38L
  • When an extremely low noise (=46 dB(A)) and low vibration e-chain®/e-tube is required Series E6.35
  • If even higher stability is required Series E4.32
  • In the case of long travels with gliding Series E4.32
  • If a compromise for more cost-effective price/strength can be made Series 2600/2700
"''